Accessories for your Air Curtain
Upgrade your system – right up to fully automatic operation!
Every building situation is different. With our wide range of accessories for different applications, the Air Curtain can be adapted even better to your specific requirements and comfort can be increased right up to fully automatic operation.
Contact switches
TK
Door contact for industrial Air Curtains
The door contact is connected to the Air Curtain control system and enables automatic operation depending on the door status: in automatic mode, it switches the Air Curtain on when the door is opened and switches it off again automatically when the door is closed.
TKB
Touchless door contact
The door contact is connected to the control components of the Air Curtain and enables automatic operation in automatic mode. When the door opens, the contact activates the Air Curtain; when the door closes, the device is automatically switched off again.
Mounting accessories
AVS
Suspension cover for Air Curtains
The AVS suspension cover ensures a clean and visually appealing appearance by elegantly concealing the supply lines and threaded rods of the Air Curtain.
DBE
Ceiling installation frame for mounting in suspended ceilings
The ceiling installation frame, consisting of four precisely fitting parts, is designed for Air Curtains housing type U. It can be flexibly positioned at the height of the suspended ceiling and screwed to the unit, enabling neat integration into suspended ceilings and ensuring an attractive overall appearance.
DH
Ceiling bracket for horizontal installation of Air Curtain systems
The ceiling bracket consists of a 1 m long threaded rod and a robust mounting bracket with integrated vibration damper. It allows stable horizontal installation of an Air Curtain at four to eight points, with the damper reliably reducing vibrations.
DHD
Comfort ceiling bracket for horizontal installation of Air Curtain systems
The comfort ceiling bracket consists of a 1 m long threaded rod, a sound-insulated mounting bracket, a turnbuckle and an integrated vibration damper. It enables stable horizontal installation of an Air Curtain at 4–8 points and reduces vibrations and operating noise.
SBW
Mounting brackets for ceiling installation
The mounting brackets enable the Air Curtain to be mounted directly on the ceiling if suspension with threaded rods is not possible. Depending on the design, they are attached to the short or long side and ensure compact, stable installation even in confined spaces.
WHK
Wall bracket for mounting on the wall
The wall bracket enables Air Curtains to be securely mounted on the wall. It is first mounted on the wall. It is then attached to the Air Curtain at the designated mounting points at the top of the unit. This enables safe and space-saving installation without ceiling suspension.
Temperature sensors
AT
Outdoor temperature sensor
The PT 1000 outdoor temperature sensor is mounted on the outside of the building and records the current temperature. The data is transmitted to the TCX control board of the Air Curtain, which automatically selects the appropriate fan speed and switches between summer and winter mode.
ERF
Room temperature sensor
The PT 1000 room sensor is installed indoors and continuously measures the room temperature. The values are transmitted to the TCX control board of the Air Curtain, which automatically adjusts the fan speed and heating mode to reliably maintain the desired temperature indoors.
Thermostats
ERT
Room thermostat
The electromechanical room thermostat controls the Air Curtain according to the set room temperature. If the room temperature is below the set value, the Air Curtain is switched on at the base load level and runs until the temperature is above the set threshold value again.
IRT
Room thermostat for industrial applications
The electromechanical room thermostat for industrial applicationscontrols the heated Air Curtain according to the set room temperature. If the temperature falls below the setpoint, it runs at base load until the threshold value is reached. IP 54 protects against dust and splash water.
FTE
Frost protection thermostat to protect the heat exchanger
The frost protection thermostat is installed on the heat exchanger of the Air Curtain and protects against frost. A 3 m capillary tube sensor measures the temperature. If it falls below 7 °C, the thermostat signals the control board to open all valves and switch off the fans to prevent cooling.
FTM
Frost protection thermostat to protect the heat exchanger
The frost protection thermostat is mounted on the heat exchanger of the Air Curtain and protects against frost. A 1 m capillary tube sensor measures the temperature. If it falls below 7 °C, the thermostat signals the control board to open all valves and switch off the fans to prevent cooling.
Valves
KR-2
2-way valve with thermostatic temperature controller
The KR‑2 is a 2‑way control valve for controlling the discharge temperature of Air Curtains. The desired temperature is set manually on the thermostat head, a remote sensor measures the current temperature and automatically regulates the flow of the heating medium for a constant, efficient temperature.
MR-2
2-way valve with electric motor actuator
The 2-way control valve with electric motor actuator regulates the constant outlet temperature of the Air Curtain. A temperature sensor in the outlet area monitors the temperature, and the TCX control sends signals to open or close the actuator depending on the measured values.
MV
Solenoid valve for automatic water shut-off during summer operation
The solenoid valve, controlled by the Teddington control board, ensures automatic water shut-off during summer operation of the Air Curtain, so that the Air Curtain runs in ambient mode without water heating.
TAV
Thermoelectric shut-off valve
This 2-way valve with thermoelectric actuator is connected to the Teddington control board and regulates the water supply to the Air Curtain. In summer, it remains closed for ambient mode without water heating; in winter, it opens and activates the heating function.
Sound insulation
SDA
Sound-absorbing insulation
Teddington Air Curtains can be optionally equipped with sound-absorbing insulation. This further reduces the already low operating noise of the units, ensuring a particularly pleasant working environment.
Further information for you
Get in touch with us!
Please fill out the contact form. Fields marked with * are mandatory.
We will get in touch with you as soon as possible.
- Air Discharge System: CONVERGO® pressure chamber nozzle system
- Air Discharge Range:
- Mounting position:
- Area of application:
- Shape:
- Heating type:
- Sound insulation:
- Unit Length: Unit length made to measure
- Fan technology: AC