E-Series Industry
Powerful air curtain for smaller industrial doors
The E-Series Industry is a powerful air curtain for smaller industrial doors, sectional doors and industrial entrances. With a recommended installation height of up to 4.40 m, it is particularly suitable for door openings where a compact design and flexible installation options are required.
The patented CONVERGO® pressure chamber nozzle system produces a stable, precisely directed air stream while requiring a lower air volume than conventional air curtains with air guide vanes. This can reduce the exchange of indoor and outdoor air through open doors and help to limit the ingress of cold outside air and draughts.
The E-Series Industry can be installed horizontally above the door or vertically alongside it. Different housing types and custom unit lengths allow the system to be adapted to the respective door and building situation. Ambient, LTHW and electric heating options are available.
Precisely directed airflow for effective air separation while requiring a lower air volume than conventional air curtain systems.
Effectiveness and reliability
Designed for cost-effective operation
The patented CONVERGO® pressure chamber nozzle system enables precise airflow control with a lower air volume than conventional air curtains with louvred discharge systems.
Quality made in Germany
Teddington air curtains are manufactured in Germany. For us, “Made in Germany” represents a high standard of quality – from precision manufacturing and careful assembly through to the final inspection of every unit.
Effective airflow across the full doorway
For effective separation, the air stream needs to reach the floor across the full width of the doorway.
Technical data
Compact design, flexible configuration
The E-Series Industry combines a compact technical design with high manufacturing quality. Different housing types, custom unit lengths and the option of horizontal or vertical installation allow the air curtain to be adapted to different industrial door and building situations.
Find out more about the individual components of the E-Series Industry.
The E-Series Industry is designed for smaller industrial door openings and offers different housing types for horizontal or vertical installation.
High-quality powder coating, individual colours possible.
1 of 6CNC manufacturing of the housing components enables a high level of dimensional accuracy and consistent manufacturing quality.
2 of 6The aerodynamically shaped air intake grille is made from slotted sheet metal and provides a clean, functional appearance.
3 of 6The nozzle can be adjusted in defined increments, allowing the air discharge angle to be set precisely.
4 of 6The discharge opening of the patented CONVERGO® nozzle extends almost continuously across the entire length of the unit. When several units are installed side by side, this allows a largely continuous discharge area to be created across the doorway.
5 of 6The large nozzle sidewalls help to guide the airflow through the discharge opening. An additional flow profile divides the airflow into a primary and secondary air stream. The higher discharge velocity of the primary air stream increases the penetration depth of the airflow.
6 of 6Housing types for different building situations
Depending on the door and building situation, the E-Series Industry is available in different housing types for horizontal or vertical installation.
Housing type S
Horizontal installation in the visible area, intake area at the front.
Housing type U
For visible installation or integration into a suspended ceiling, with air intake from below and the underside of the unit remaining visible. An optional ceiling installation frame is available.
Housing type S-V
Vertical visible installation, air intake at the front.
Wide range of accessories
A wide range of accessories is available for our air curtains – from contact switches and thermostats to temperature sensors, valves and practical mounting accessories. This allows the units to be adapted to different requirements and installation situations.
Comfort ceiling bracket
The comfort ceiling bracket enables stable multi-point mounting of the air curtain and reduces vibrations and noise.
Frost protection thermostat
The frost protection thermostat mounted on the heat exchanger measures the temperature via a capillary sensor. Below 7 °C, it signals the control system to open the valves and switch off the fans to help prevent frost damage.
Door contact
The door contact is connected to the air curtain control system and enables automatic operation: when the door opens, the air curtain is switched on; when the door closes, it is switched off automatically.
RAL 7011
Iron Grey
RAL 9005
Deep Black
RAL 9006
White Aluminium
RAL 9010
Pure White
Black grey metallic
Metallic fine structure / matt
DB 703
Dark Grey
Individual colours
Teddington air curtains are powder-coated to a high standard and supplied in RAL 9016 Traffic White as standard. Six additional colours are available for a small surcharge, with custom colours available on request.
Application examples
TCX – The latest generation of air curtain controls
The TCX controller makes it easy to control and configure your Teddington air curtain system. With just a few settings, the system can be adapted to suit your individual requirements – from a single air curtain to a complex installation with multiple units.
TCX – flexible control for your Teddington air curtain system.
High process reliability
Flexible integration
Multiple control functions
Control panel with touch display
How can we help with your project?
Tell us about your requirements using the contact form. Fields marked with * are required.
- Air discharge system: CONVERGO® pressure chamber nozzle system
- Air discharge range:
- Mounting position:
- Application:
- Shape:
- Heating options:
- Sound insulation:
- Unit length: Custom unit lengths available
- Fan type: AC